SuperBot-I
SuperBOT-I Automated Handler
Smart Automation Desktop
Programming system


  Device List  

 
 

Features:
  • The largest device support in the industry: Supports over 66.000+ IC devices from 217 manufacturers and continuing
  • Uses Industrial Personal Computer (with control card inside)
  • Carries servo system and vision system mode to locate fast and accurately and finish chip capture, placement, programming, and packaging automatically instead of traditional manual operation.
  • Internal programmers are 4 SuperPro 5000 modules, which are latest, high-speed and intelligent universal programmers from Xeltek. Each module can burn chips independently, so its efficiency is much higher than parallel-production programmers.
  • Its advantages includes:
    • Modularizing design of system
    • switching time
    • High throughput (1400 devices per hour)
    • Cost effective
  • IC packaging supports standard tray and Tape Reel, Tube input and output.
Motion

Throughput Up to 1400 UPH (units per hour) handler index time with zero programming time for SuperBOT
Content High performance control card & servo drive system.
Resolution X axis: (+/-)0.02mm; Y axis:(+/-) 0.02mm; Z axis: (+/-)0.05mm.
Max. stroke X axis: 500 mm; Y axis: 380mm; Z axis:60mm.
Pick & Place head placement accuracy (+/-) 0.08mm.

Vision System

Camera 400*400 pixels.
Vision resolution 0.1mm.
Process time per view ~0.5sec.

Built in Programmer

Programming systems are USB Interfaced 4 Ultra-high Speed Stand-alone Universal Device Programming units; SuperPro 5000

I/O Devices

Tray : It is the standard I/O device of the machine. Users provide the type and three special positions of the tray, and the system can calculate the position of each chip on the tray.
Auto tray : This device includes tray in and tray out. Users can put 10 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine.
Tape-in Device : An input device for tapes with IC packaging. It must be modified for custom IC size.
Tape-out Device : An output device for tapes with IC packaging. It handles tape widths of 12mm to 40mm. The tape can be air-pressed or heat-sealed.
Tube-In Device
Tube-Out Device

Assistant Control

Built-in Control : PC-based control with Windows XP.
Display : LCD monitor.
Data entry : Keyboard & mouse.

Speed Comparison

Device P+V(s) Compare with SP3000U Type
K8P6415UQB 9.1(P)+2.3(V)= 11.4(s) 25.1(P)+16.8(V)=41.9(s) 64Mb NOR FLASH
AM29DL640G 9.1(P)+2.3(V)= 11.4(s) 38.5(P)+11.8(V)=50.3(s) 64Mb NOR FLASH
K9F1208U0B 35.2(P)+32.2(V)=67.4 188.6(P)+179.2(V)=367.8 512Mb NAND FLASH
KAP21WP00M 53.2(p)+54.8(V)=108 - 1Gb NAND FLASH
K9F1G08U0A 60.4(P)+56.1(V)=116.5 362.3(P)+359.3(v)=721.6 1Gb NAND FLASH
AT28C64B 0.8(P)+0.1(V)= 0.9(s) 1.2(P)+0.8(V)= 2.0(s) 64Kb EEPROM
24AA128 2.7(P)+1.8(V)= 4.5(s) 5.0(P)+4.0(V)= 9.0(s) 128Kb SPI EEPROM
QB25F640S33B60 29.0(P)+14.4(V)= 43.4(s) 55.2(P)+41.4(V)= 96.6(s) 64Mb SPI EEPROM
AT89C55WD 2.5(P)+0.4(V)=2.9(s) 3.3(P)+1.0(V)=4.3(s) 20KB FLASH MCU
ST72F324BK4B5 2.6(P)+1.3(V)=3.9(s) 18(P)+7(V)=25(s) 32KB FLASH MCU
MB89F538 1.21(P)+0.93(V)=2.14(s) 12(P)+6(V)=18(s) 32KB FLASH MCU
Upd78F9234 2.6(P)+1.3(V)=3.9(s) 38(P)+16(V)=54(s) 16KB FLASH MCU


Device Update

  • XELTEK updates software and device algorithm regularly.
  • View the latest Device List.
  • Updates are available by mail at a nominal charge.
  • XELTEK also adds devices upon customerís request at its option.

Hardware & Electrical Specifications

  • Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic.
  • Packages supported: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
  • PC interface: USB2.0
  • Electrical spec. of the AC adapter: AC input 90V to 250V, 50/60Hz, DC output -; power:2KW
  • Mechanical parameter: Main unit: Size: 820*640*1550 mm Weight: 547 lbs (248 Kg.)
  • Packing weight: 594 lbs (270 Kg.)

Items Included
  • SuperBOT unit with tray
  • Integrated 4 units of SuperPro 5000 with DIP48 Socket Adapters
  • Industrial Personal Computer
  • Software CD
  • User's Guide


Optional Accessories
  • Socket Adapters in various packages (etc; SOT23 sockets)
  • 20- Auto Tray attachment (Inkjet Ready)
  • Tape Reel In/Tape Reel out (Inkjet Ready)
  • Tube in/ Tube out
  • Inkjet Printer Attachment
  • Ink Cartridges